Vacuum Ovens HS-V2

Main Characteristics

The rise in temperature is very fast.
Heating is ensured by sheathed stainless steel heating elements, ideally positioned in the air flow and controlled by SSRs.
A BETTER INSULATION
No contact between inner and outer casing. The thick insulation, asbestos-free, allow :
– excellent thermal stability,
– low heat dissipation,
– reduced energy costs,
– low surface temperatures.

Exterior made of steel coated with blue and white epoxy paints
The inner casing is made of corrosion resistant strong thick stainless steel.
THICK INSULATION
No contact between the inner and outer casings for no thermal bridge.
Insulation is made of asbestos-free glass wool : low surface temperature, low electrical consumption, a rapid rise in temperature.
DOOR WITH VIEWING WINDOW
The door is equipped with a thick safety glass.
SEALING
A silicone gasket provides the seal of the door. Closing the door at 2 points.
EASY CLEANING
The rounded corners of the inner casing make easier cleaning operations ; the racks and the seal are easy-to-remove.

TEMPERATURE CONTROL
Automatic control and real-time monitoring of temperature measured by a thermocouple J probe.
VACUUM CONTROL
High precision PID control. Several modes of vacuum regulation are possible : maximum vacuum level of the pump; maintaining a constant pressure. Automatic control of solenoid valves for changing the vacuum level. Real-time monitoring of vaccum level.
CYCLE PROFILER
A profiler of 4 programs of 16 steps allows the creation of cycles of pressure and temperature combined